![]() ![]() Quoted MTBF (mean time between failures ) figures for a DDS-2 tape are 3,000 full recordings. These are available from your local distributor, or from Sonifex. If a standard DAT tape is inserted into the Sentinel+, it will not be able to format the tape and will show "Play Only" on the Mode Display. These tapes have shown to give the least errors and provide the most consistent audio response. ![]() We recommend the use of Hewlett Packard DDS-2 data DAT tapes for use with the Sentinel+ machines. The DDS and DDS-2 standards were formed by Sony and Hewlett Packard and they describe a format for writing data to the DAT tapes while providing higher levels of error checking and validation. These are tapes used by the computer industry for backing up data. The Sentinel+ operates with 120m DDS-2 and 90m DDS data DAT tapes. ![]() What kind of DAT tapes do I have to use ? When I put a new DAT tape into the Sentinel+, it says "Play Only". Please check the Sentinel+ Specifications page for approximate durations. This depends on the sample rate and number of channels that are being used. What recording times are available with a Sentinel+ logger? The lithium cell in the unit needs replacing, Sonifex part number 16-283. If you have any specific questions regarding the operation of Sentinel+ which aren't covered below, please contact your nearest distributor, or Sonifex directly.Äownload this FAQ as a text file The Sentinel fails to initialise and/or does not retain the time and date settings. This FAQ (frequently asked questions) answers some of the popular questions asked about the Sentinel+ unit and the way that it operates. FAQs Sentinel+ Index Frequently Asked Questions (FAQ) ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |